IDEAL 10
Specifications
| Engine | ||
|---|---|---|
| Engine Power | 512kW (687hp) 687hp 512kW | |
| Rated Engine Speed | 1900r/min | |
| Make | MAN 16.2L Tier 4F 6 Cylinder | |
| Displacement | 16364cm^3 (998.6cu. in.) 998.6cu. in. 16364cm^3 | |
| Number of Cylinders | 6 | |
| Fuel Type | Diesel | |
| Fuel Injection | Direct Injection | |
| Cooling | Liquid Cooled | |
| Fuel Tank Capacity | 330gal. (1,250.0L) 1,250.0L 330gal. | |
| DEF Tank Capacity | 47gal. (180.0L) 180.0L 47gal. | |
| Warming | Block Heater | |
| Transmission | ||
|---|---|---|
| Maximum Speed | 24mph (40km/h) 40km/h 24mph | |
| Type | Hydrostatic | |
| Ranges | 2 | |
| Speed Control | Cruise | |
| Drive | 2WD, 4WD | |
| Differential | Locking | |
| Additional Drivetrain | ||
|---|---|---|
| Steering Mode | rear wheel steer | |
| Hydraulics | ||
|---|---|---|
| System Capacity | 29gal. (110.0L) 110.0L 29gal. | |
| Maximum Available Hydraulic Oil | 21gal. (80.0L) 80.0L 21gal. | |
| Steering | Hydraulic Power | |
| Technology | ||
|---|---|---|
| Telemetry | 5 Year Fendt Connect Subscription | |
| Electrical | ||
|---|---|---|
| Alternator | 320A | |
| Battery | 1000CCA | |
| Operator Station | ||
|---|---|---|
| Configuration | Cab | |
| Feeding System | ||
|---|---|---|
| Feeder House Lifting Capacity | 12998lb. (5896kg) 5896kg 12998lb. | |
| Lift Cylinder Diameter | 3-5/8" (92mm) 92mm 3-5/8" | |
| Feeder Housing Chains | 4 | |
| Reverse | Electro Hydraulic | |
| Feeder Width | 3225cm (1") 1" 3225cm | |
| Rock Trap | Right Hand | |
| Threshing | ||
|---|---|---|
| Separator Type | Dual Rotor | |
| Class | 10 | |
| Rotor Length | 15' 10-7/16" (4837mm) 4837mm 15' 10-7/16" | |
| Rotor Diameter | 1' 11-5/8" (600mm) 600mm 1' 11-5/8" | |
| Maximum Rotor Speed | 1160r/min | |
| Threshing Area | 17.9sq. ft. (1.66m^2) 1.66m^2 17.9sq. ft. | |
| Separation Area | 31.0sq. ft. (2.88m^2) 2.88m^2 31.0sq. ft. | |
| Total Separation Area | 48.4sq. ft. (4.50m^2) 4.50m^2 48.4sq. ft. | |
| Cleaning | ||
|---|---|---|
| Chaffer Area | 32.1sq. ft. (2.98m^2) 2.98m^2 32.1sq. ft. | |
| Sieve Area | 58.1sq. ft. (5.40m^2) 5.40m^2 58.1sq. ft. | |
| Total Cleaning Area | 85.6sq. ft. (7.95m^2) 7.95m^2 85.6sq. ft. | |
| Sieve Adjustment | Electric | |
| Maximum Cleaning Fan Speed | 1400r/min | |
| Return System | Separate | |
| Grain Handling | ||
|---|---|---|
| Unloading Rate | 6bu. per second, 4bu. per second | |
| Grain Tank | 485bu., 350bu. | |
| Unloading Auger Length | 30' 1/4" (9150mm) 9150mm 30' 1/4" | |
| Residue Management | ||
|---|---|---|
| Straw Chopper Knives | 56 | |
| Maximum Chopper Speed | 3600r/min | |
| Chaff Spreader | Hydraulic | |
| Wheels | ||
|---|---|---|
| Front | FD TrakRide 26 | |
| Track Width | 66cm (2' 2") 2' 2" 66cm | |
| Tensioning | Terminal Display | |
| Front Idler | Belt Tensioning Cylinder | |
| Boggie Wheels | 2 | |
| Rear Idler | Suspension Cylinder | |
| Footprint Length | 193cm (6' 4-3/16") 6' 4-3/16" 193cm | |
| Footprint Area | 2.55m^2 (27.4sq. ft.) 27.4sq. ft. 2.55m^2 | FD TrakRide 30 |
| Track Width | 76cm (2' 6") 2' 6" 76cm | |
| Tensioning | Terminal Display | |
| Front Idler | Belt Tensioning Cylinder | |
| Boggie Wheels | 2 | |
| Rear Idler | Suspension Cylinder | |
| Footprint Length | 193cm (6' 4-3/16") 6' 4-3/16" 193cm | |
| Footprint Area | 2.94m^2 (31.6sq. ft.) 31.6sq. ft. 2.94m^2 | FD TrakRide 36 |
| Track Width | 91cm (3') 3' 91cm | |
| Tensioning | Terminal Display | |
| Front Idler | Belt Tensioning Cylinder | |
| Boggie Wheels | 2 | |
| Rear Idler | Suspension Cylinder | |
| Footprint Length | 193cm (6' 4-3/16") 6' 4-3/16" 193cm | |
| Footprint Area | 3.52m^2 (37.9sq. ft.) 37.9sq. ft. 3.52m^2 | |
| Dimensions | ||
|---|---|---|
| Length | 38' 5-7/16" (11720mm) 11720mm 38' 5-7/16" | |
| Wheelbase | 13' 4-7/16" (4075mm) 4075mm 13' 4-7/16" | |
| Width | 16' 9-3/16" (5110mm) 5110mm 16' 9-3/16" | |
| Height | 13' 1-1/2" (4000mm) 4000mm 13' 1-1/2" | |
| Turning Radius | 15' 9" (4800mm) 4800mm 15' 9" | |
| Cab Width | 5' 3" (1600mm) 1600mm 5' 3" | |