Engine | ||
---|---|---|
Engine Power | 350kW (470hp) 470hp 350kW | |
Rated Engine Speed | 1900r/min | |
Make | MAN D2676 LE121 | |
Displacement | 757.9cu. in. (12.4L) 12.4L 757.9cu. in. | |
Number of Cylinders | 6 | |
Fuel Type | Diesel | |
Fuel Injection | Direct Injection | |
Cooling | Liquid Cooled | |
Fuel Tank Capacity | 330gal. (1,250.0L) 1,250.0L 330gal. | |
DEF Tank Capacity | 47gal. (180.0L) 180.0L 47gal. | |
Warming | Block Heater |
Transmission | ||
---|---|---|
Maximum Speed | 24mph (40km/h) 40km/h 24mph | |
Type | Hydrostatic | |
Ranges | 2 | |
Speed Control | Cruise | |
Drive | 4WD, 2WD | |
Differential | Locking |
Additional Drivetrain | ||
---|---|---|
Steering Mode | rear wheel steer |
Hydraulics | ||
---|---|---|
System Capacity | 29gal. (110.0L) 110.0L 29gal. | |
Maximum Available Hydraulic Oil | 21gal. (80.0L) 80.0L 21gal. | |
Steering | Hydraulic Power |
Technology | ||
---|---|---|
Telemetry | 5 Year Fendt Connect Subscription |
Electrical | ||
---|---|---|
Alternator | 320A | |
Battery | 1000CCA |
Operator Station | ||
---|---|---|
Configuration | Cab |
Feeding System | ||
---|---|---|
Feeder House Lifting Capacity | 9997lb. (4535kg) 4535kg 9997lb. | |
Lift Cylinder Diameter | 3-3/8" (85mm) 85mm 3-3/8" | |
Feeder Housing Chains | 3 | |
Feeder Width | 3225cm (1") 1" 3225cm | |
Reverse | Electro Hydraulic | |
Rock Trap | Right Hand |
Threshing | ||
---|---|---|
Class | 8 | |
Separator Type | Dual Rotor | |
Rotor Length | 15' 10-7/16" (4837mm) 4837mm 15' 10-7/16" | |
Rotor Diameter | 1' 11-5/8" (600mm) 600mm 1' 11-5/8" | |
Maximum Rotor Speed | 920r/min | |
Threshing Area | 17.9sq. ft. (1.66m^2) 1.66m^2 17.9sq. ft. | |
Separation Area | 20.7sq. ft. (1.92m^2) 1.92m^2 20.7sq. ft. | |
Total Separation Area | 38.5sq. ft. (3.58m^2) 3.58m^2 38.5sq. ft. |
Cleaning | ||
---|---|---|
Chaffer Area | 29.2sq. ft. (2.71m^2) 2.71m^2 29.2sq. ft. | |
Sieve Area | 52.7sq. ft. (4.90m^2) 4.90m^2 52.7sq. ft. | |
Total Cleaning Area | 80.2sq. ft. (7.45m^2) 7.45m^2 80.2sq. ft. | |
Sieve Adjustment | Electric | |
Maximum Cleaning Fan Speed | 1400r/min | |
Return System | Separate |
Grain Handling | ||
---|---|---|
Unloading Rate | 4bu. per second, 6bu. per second | |
Grain Tank | 350bu., 485bu. | |
Unloading Auger Length | 30' 1/4" (9150mm) 9150mm 30' 1/4" |
Residue Management | ||
---|---|---|
Straw Chopper Knives | 56 | |
Maximum Chopper Speed | 3600r/min | |
Chaff Spreader | Hydraulic |
Wheels | ||
---|---|---|
Front | FD TrakRide 26 | |
Track Width | 66cm (2' 2") 2' 2" 66cm | |
Tensioning | Terminal Display | |
Front Idler | Belt Tensioning Cylinder | |
Boggie Wheels | 2 | |
Rear Idler | Suspension Cylinder | |
Footprint Length | 193cm (6' 4-3/16") 6' 4-3/16" 193cm | |
Footprint Area | 2.55m^2 (27.4sq. ft.) 27.4sq. ft. 2.55m^2 | FD TrakRide 36 |
Track Width | 91cm (3') 3' 91cm | |
Tensioning | Terminal Display | |
Front Idler | Belt Tensioning Cylinder | |
Boggie Wheels | 2 | |
Rear Idler | Suspension Cylinder | |
Footprint Length | 193cm (6' 4-3/16") 6' 4-3/16" 193cm | |
Footprint Area | 3.52m^2 (37.9sq. ft.) 37.9sq. ft. 3.52m^2 | FD TrakRide 30 |
Track Width | 76cm (2' 6") 2' 6" 76cm | |
Tensioning | Terminal Display | |
Front Idler | Belt Tensioning Cylinder | |
Boggie Wheels | 2 | |
Rear Idler | Suspension Cylinder | |
Footprint Length | 193cm (6' 4-3/16") 6' 4-3/16" 193cm | |
Footprint Area | 2.94m^2 (31.6sq. ft.) 31.6sq. ft. 2.94m^2 |
Dimensions | ||
---|---|---|
Length | 38' 5-7/16" (11720mm) 11720mm 38' 5-7/16" | |
Wheelbase | 13' 4-7/16" (4075mm) 4075mm 13' 4-7/16" | |
Width | 16' 9-3/16" (5110mm) 5110mm 16' 9-3/16" | |
Height | 13' 1-1/2" (4000mm) 4000mm 13' 1-1/2" | |
Turning Radius | 15' 9" (4800mm) 4800mm 15' 9" | |
Cab Width | 5' 3" (1600mm) 1600mm 5' 3" |