1526
Specifications
| Engine | ||
|---|---|---|
| Engine Power | 18kW (25hp) 25hp 18kW | |
| PTO Power | 14kW (21hp) 21hp 14kW | |
| Rated Engine Speed | 2600r/min | |
| Make | ISEKI E3CD | |
| Displacement | 91.5cu. in. (1.5L) 1.5L 91.5cu. in. | |
| Number of Cylinders | 3 | |
| Fuel Type | Diesel | |
| Cooling | Liquid Cooled | |
| Fuel Tank Capacity | 7gal. (27.0L) 27.0L 7gal. | |
| Warming | Block Heater | |
| Transmission | ||
|---|---|---|
| Type | Hydrostatic | |
| Ranges | 3 | |
| Speed Control | Cruise | |
| Differential | Limited | |
| Hydraulics | ||
|---|---|---|
| Pump | MF 1500 Series | |
| Pump Type | Gear | |
| Hydraulic Flow | 8.7GPM (32L/min) 32L/min 8.7GPM | |
| Maximum Operating Pressure | 2134psi (14715kPa) 14715kPa 2134psi | |
| Rear Remote Valves | 1 | |
| Steering | Hydraulic Power | |
| Hitching | ||
|---|---|---|
| Rear Hitch | MF 1500 Series | |
| Hitch Category | Category 1 | |
| Lift Capacity at Pins | 1322lb. (600kg) 600kg 1322lb. | |
| Lift Capacity 24" Behind Pins | 992lb. (450kg) 450kg 992lb. | |
| PTO | ||
|---|---|---|
| Middle | 2000 | |
| Rear | 540 | |
| Type | Independent | |
| Operator Station | ||
|---|---|---|
| Configuration | Open ROPS | |
| Seat | MF Standard ROPS Seat | |
| Material | Vinyl | |
| Safety Arrest | 2pt Belt | |
| Seat | Forward/Reverse Adjustment | |
| Suspension | Mechanical | |
| Wheels | ||
|---|---|---|
| Front | CARLI Trac Chief 25×8.50-14 | |
| Size | 25×8.50-14 | |
| Type | Industrial | |
| Section Width | 8-1/2" (216mm) 216mm 8-1/2" | |
| Overall Diameter | 2' 1-13/16" (655mm) 655mm 2' 1-13/16" | |
| Rolling Circumference | 6' 5-1/16" (1958mm) 1958mm 6' 5-1/16" | CARLI Multi-Trac C/S 25×8.50-14 |
| Size | 25×8.50-14 | |
| Type | Turf | |
| Section Width | 8-9/16" (218mm) 218mm 8-9/16" | |
| Overall Diameter | 2' 1" (635mm) 635mm 2' 1" | |
| Rear | CARLI Trac Chief 14-17.5 | |
| Size | 14-17.5 | |
| Type | Industrial | |
| Section Width | 1' 2-1/4" (362mm) 362mm 1' 2-1/4" | |
| Overall Diameter | 2' 11-11/16" (907mm) 907mm 2' 11-11/16" | |
| Rolling Circumference | 9' 1-1/2" (2781mm) 2781mm 9' 1-1/2" | CARLI Multi-Trac C/S 36×13.50-15 |
| Size | 36×13.50-15 | |
| Type | Turf | |
| Section Width | 1' 3-1/16" (383mm) 383mm 1' 3-1/16" | |
| Overall Diameter | 3' 7/8" (937mm) 937mm 3' 7/8" | |
| Static Loaded Radius | 1' 4-3/8" (416mm) 416mm 1' 4-3/8" | |
| Rolling Circumference | 8' 11-13/16" (2739mm) 2739mm 8' 11-13/16" | |
| Dimensions | ||
|---|---|---|
| Length | 9' 3" (2820mm) 2820mm 9' 3" | |
| Wheelbase | 5' 1-7/16" (1560mm) 1560mm 5' 1-7/16" | |
| Width | 4' 7-1/8" (1400mm) 1400mm 4' 7-1/8" | |
| Height | 8' 1/16" (2440mm) 2440mm 8' 1/16" | |
| Minimum Ground Clearance | 11-5/8" (295mm) 295mm 11-5/8" | |
| Turning Radius | 7' 10-1/2" (2400mm) 2400mm 7' 10-1/2" | |
| Loader | ||
|---|---|---|
| Loader | MF FLx2106 | |
| Bucket Sizes | 137cm (4' 6") 4' 6" 137cm | |
| Maximum Lift Height – Pivot Pin | 2108mm (6' 11") 6' 11" 2108mm | |
| Lift Capacity to Max Height – Pivot Pin | 576kg (1270lb.) 1270lb. 576kg | |
| Breakout Force – Pivot Pin | 1821lb. (826kg) 826kg 1821lb. | |
| Digging Depth | 1-9/16" (40mm) 40mm 1-9/16" | |
| Max Rollback Angle | 31deg | |
| Max Dump Angle | 42deg | |
| Lift Cylinder Diameter | 1-3/4" (45mm) 45mm 1-3/4" | |
| Bucket Cylinder Diameter | 1-3/4" (45mm) 45mm 1-3/4" | |
| Tool Carrier | Skid Steer Quick Attach | MF L100E |
| Bucket Sizes | 137cm (4' 6") 4' 6" 137cm, 152cm (5') 5' 152cm | |
| Maximum Lift Height – Pivot Pin | 6' 11-7/8" (2130mm) 2130mm 6' 11-7/8" | |
| Lift Capacity to Max Height – Pivot Pin | 820lb. (372kg) 372kg 820lb. | |
| Breakout Force | 564daN (1270lbf) 1270lbf 564daN | |
| Digging Depth | 1-3/16" (30mm) 30mm 1-3/16" | |
| Max Rollback Angle | 28deg | |
| Max Dump Angle | 42deg | |
| Tool Carrier | Euro Quick Attach, Skid Steer Quick Attach | |