| Engine | ||
|---|---|---|
| Engine Power | 18.27kW (24.50hp) 24.50hp 18.27kW | |
| PTO Power | 14.62kW (19.60hp) 19.60hp 14.62kW | |
| Rated Engine Speed | 3,000r/min | |
| Make | ISEKI E3112-XB03 | |
| Displacement | 0.30gal. (1.12L) 1.12L 0.30gal. | |
| Number of Cylinders | 3 | |
| Fuel Type | Diesel | |
| Fuel Tank Capacity | 6.60gal. (25L) 25L 6.60gal. | |
| Warming | Block Heater | |
| Transmission | ||
|---|---|---|
| Type | Hydrostatic | |
| Ranges | 2 | |
| Forward Speeds | 2 | |
| Speed Control | Cruise | |
| Drive | 4WD | |
| Differential | Limited | |
| Hydraulics | ||
|---|---|---|
| Maximum Operating Pressure | 1,920.88psi (13,244kPa) 13,244kPa 1,920.88psi | |
| Steering | Hydraulic Power | |
| Hitching | ||
|---|---|---|
| Rear Hitch | MF 1GC | |
| Lift Capacity at Pins | 282.13kg (622lb.) 622lb. 282.13kg | |
| Lift Capacity 24" Behind Pins | 299.82kg (661lb.) 661lb. 299.82kg | |
| PTO | ||
|---|---|---|
| Middle Speed | 2000 | |
| Rear Speed | 540 | |
| Type | Independent | |
| Electrical | ||
|---|---|---|
| Front Lights | 2 | |
| Voltage | 12V | |
| Alternator | 40A | |
| Alternator Count | 1 | |
| Battery | 390CCA | |
| Operator Station | ||
|---|---|---|
| Configuration | Open ROPS | |
| Steering Column | Tilting | |
| Operator Seat | MF Standard ROPS Seat | |
| Material | Vinyl | |
| Safety Arrest | 2pt Belt | |
| Seat | Forward/Reverse Adjustment | |
| Suspension | Mechanical | |
| Wheels | ||
|---|---|---|
| Front | CARLI Tru Power 18×8.50-10 | |
| Size | 18×8.50-10 | |
| Tread Pattern | R1 (Ag) | |
| Section Width | 7 (198mm) 198mm 7 | |
| Overall Diameter | 1 (460mm) 460mm 1 | CARLI Multi-Trac C/S 18×8.50-10 |
| Size | 18×8.50-10 | |
| Tread Pattern | R3 (Turf) | |
| Section Width | 8 (206mm) 206mm 8 | |
| Overall Diameter | 1 (457mm) 457mm 1 | CARLI Trac Chief 18×8.50-10 |
| Size | 18×8.50-10 | |
| Tread Pattern | R4 (Ind) | |
| Section Width | 8 (211mm) 211mm 8 | |
| Overall Diameter | 1 (462mm) 462mm 1 | |
| Rolling Circumference | 4 (1,395mm) 1,395mm 4 | |
| Rear | CARLI Trac Chief 26×12.00-12 | |
| Size | 26×12.00-12 | |
| Tread Pattern | R4 (Ind) | |
| Section Width | 1 (320mm) 320mm 1 | |
| Overall Diameter | 2 (648mm) 648mm 2 | |
| Rolling Circumference | 6 (1,941mm) 1,941mm 6 | CARLI Multi-Trac C/S 26×12.00-12 |
| Size | 26×12.00-12 | |
| Tread Pattern | R3 (Turf) | |
| Section Width | 11 (290mm) 290mm 11 | |
| Overall Diameter | 2 (645mm) 645mm 2 | CARLI Tru Power 26×12.00-12 |
| Size | 26×12.00-12 | |
| Tread Pattern | R1 (Ag) | |
| Section Width | 1 (312mm) 312mm 1 | |
| Overall Diameter | 2 (650mm) 650mm 2 | |
| Dimensions | ||
|---|---|---|
| Length | 8 (2,480mm) 2,480mm 8 | |
| Wheelbase | 4 (1,450mm) 1,450mm 4 | |
| Width | 3 (1,185mm) 1,185mm 3 | |
| Height | 6 (1,850mm) 1,850mm 6 | |
| Minimum Ground Clearance | 6 (170mm) 170mm 6 | |
| Turning Radius | 8 (2,550mm) 2,550mm 8 | |
| Weight | 1,477.10lb. (670kg) 670kg 1,477.10lb. | |
| Loader | ||
|---|---|---|
| Loader | MF FL1805 | |
| Attachments | MF 48" Material Bucket | |
| Width | 121.92cm (4) 4 121.92cm | |
| Maximum Lift Height – Pivot Pin | 6 (1,880mm) 1,880mm 6 | |
| Lift Capacity to Max Height – Pivot Pin | 921.53lb. (418kg) 418kg 921.53lb. | |
| Breakout Force – Pivot Pin | 1,391.12lb. (631kg) 631kg 1,391.12lb. | |
| Digging Depth | 1 (50mm) 50mm 1 | |
| Max Rollback Angle | 30deg | |
| Max Dump Angle | 43deg | |
| Lift Cylinder Diameter | 1 (40mm) 40mm 1 | |
| Bucket Cylinder Diameter | 1 (40mm) 40mm 1 | |
| Tool Carrier | Skid Steer Quick Attach | |
| Attachments | ||
|---|---|---|
| Mowers | MF 2315 | |
| Maximum Working Width | 4 (1,372mm) 1,372mm 4 | |
| Mount | Mid-Mount | |
| Type | Mulching | |
| Drive | Mid PTO | MF 2320 |
| Maximum Working Width | 4 (1,372mm) 1,372mm 4 | |
| Mount | Mid-Mount | |
| Type | Side Discharge | |
| Drive | Mid PTO | MF 2326 |
| Maximum Working Width | 5 (1,524mm) 1,524mm 5 | |
| Mount | Mid-Mount | |
| Type | Side Discharge | |
| Drive | Mid PTO | |
| Blowers | MF SBx1270 | |
| Maximum Working Width | 127cm (4) 4 127cm | |
| Full Height | 53.34cm (1) 1 53.34cm | |
| Impeller Blades | 4 | |
| Impeller Diameter | 38.10cm (1) 1 38.10cm | |
| Impeller Drum | Static | |
| Chute Rotation | Manual, Hydraulic, Motor | |
| Hood Deflector | Electric | |
| Cutting Width | 127cm (4) 4 127cm | |
| Cutting Height | 53.34cm (1) 1 53.34cm | |
| Main Auger Diameter | 31.75cm (1) 1 31.75cm | |
| Augers | Single | |
| Blades | MF FBx1574 | |
| Maximum Working Width | 157.48cm (5) 5 157.48cm | |
| Brooms | MF RBx1524 | |
| Drive System | PTO | |
| Maximum Working Width | 152.40cm (5) 5 152.40cm | |
| Weight | 181.44kg (400lb.) 400lb. 181.44kg | |
| Gauge Wheels | 2 | |