Fendt 200S GEN3 Maintenance Schedules

Go Back to Maintenance Schedules

Engine

Top
Job Notes Part Quantity
Check engine heat shielding for trapped debris
Check exhaust DPF/catalyst shield hardware
Check engine oil level
Drain water from fuel filter
Check air filter maintenance code
Check hose clamps on coolant and air intake system
Check engine air filters Clean Out (Advise if replacement needed) 72474352 Outer, 72474353 Inner
Check and clean cooling radiators and fan
Check for coolant system leaks
Check fuel tanks and hoses for condition and leaks
Check belt condition and tension, replace if necessary

Front Axle & PTO

Top
Job Notes Part Quantity
Check tire condition and wheel alignment
Check oil level in front PTO 80W90Gear Oil
Change front axle differential oil 80W90Gear Oil 79036959B 5L
Front axle drain plug gasket 72315103 2
Change oil in front axle hubs 79036959B 2L
Change gasket in front differential 72315103 2

Transmission

Top
Job Notes Part Quantity
Check transmission oil level
Change transmission pressure filter and o-ring 72659254 1

Hydraulics

Top
Job Notes Part Quantity
Check hydraulic oil level
Drain oil from couplers' oil recovery bottles

Cab

Top
Job Notes Part Quantity
Clean the a/c condenser
Check operation of the A/C system
Check and Adjust A/C compressor belt
Check the torque of cab mounting fasteners
Windshield washer reservoir 15-204 1

Compressed Air System

Top
Job Notes Part Quantity
Operate tank drain valve
Drain Water from Air System
Compressed air function/leak test
Check air compressor V-belt tension

Electrical System

Top
Job Notes Part Quantity
Check batteries for corrosion or loose connections
Read out, record diagnostic memory & remedy faults
Check lighting, signaling, and warnings systems for correct operation
Check the operation of the safety start switches
Check condition & operation of electrical components

General

Top
Job Notes Part Quantity
Tighten wheel hardware to specifications
Check for loose hardware, linkages; check for leaks
Tighten loader mounting hardware to specifications
Check tire pressure
Lubricate all grease points 79014728B 1
Test drive tractor, checking functions & braking systems
After road test check for leaking oils, fuel or coolant
Check electro-hydraulic steering
Check brake control
Check if safety decals are in place and legible
Road test machine to test steering, brakes, instruments and systems for correct operation