Go Back to Maintenance Schedules
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check engine heat shielding for trapped debris | |||
| Perform stationary regeneration of DPF | Stationary regen must always be done before changing engine oil. Note; regen is initiated through TCD! | ||
| Change engine oil filter | 1 | ||
| Change engine oil | 10W40 Mann Engine Oil | 79036362B | 14L |
| Oil drain plug gasket | 1 | ||
| Change fuel filter | Fuel Filter Kit | 1 | |
| Change the DEF filter | 1 | ||
| Change DEF breather filter, blow out hose | ACO H835200730200 | 1 | |
| Inspect the DEF breather filter, and blow out hose | |||
| Check air filter maintenance code | |||
| Check engine air intake system for leaks | |||
| Check engine air filters | 72614435 Outer, V36539700 Inner | ||
| Empty dust discharge valve | |||
| Check and clean cooling radiators and fan | |||
| Check engine coolant level | |||
| Check for coolant system leaks | |||
| Check engine belts | replace as necessary |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check transmission oil level | 821XL Hyd. Trany Fluid | ||
| Change transmission pressure filter and o-ring | O-Ring 72313495 | ACO F91610060001A | 1 |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check oil level in front PTO | If equipped 821XL Hyd. Trany Fluid | ||
| Change front axle differential oil | 80W90Gear Oil | 79036959B | 8 |
| Change gasket in front differential | ACO X540007678000 | 2 | |
| Change oil in front axle hubs | 80W90Gear Oil | 79036959B | 2 |
| Change front hub gaskets | ACO X540007678000 | 2 | |
| Check front axle toe-in |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check hydraulic oil level | 821XL Hyd. Trany Fluid | ||
| Change hydraulic oil | 821XL Hyd. Trany Fluid | 79035451B | 42L |
| Drain plug gasket | 72493820 is oring for screw on the plate | ACO F339860060050 | 1 |
| ACO X540005478000 | 1 | ||
| Change hydraulic return line filter | O-Ring is 72474606 | ACO H339860060100 | 1 |
| Change control pressure fine filter | ACO S220PF301001A | 1 | |
| Change hydraulic vent filter | ACO X820001190000 | 1 | |
| Clean the external pressure supply sieve filter | |||
| Drain oil from couplers' oil recovery bottles |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Change fresh air filter | ACO H737812140010 | 1 | |
| Change recirculating air filter | ACO H350810140080 | 2 | |
| Clean the a/c condenser | |||
| Check and Adjust A/C compressor belt | |||
| Windshield washer reservoir | Refill as needed. | 15-204 | 1 |
| Check the torque of cab mounting fasteners | |||
| Check operation of the A/C system |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Compressed air function/leak test | |||
| Operate tank drain valve | |||
| Change Air Dryer Cartridge | ACO F842880141020 | 1 |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check lighting, signaling, and warnings systems for correct operation | |||
| Check software version, and update if necessary | |||
| Check batteries for corrosion or loose connections | |||
| Read out, record diagnostic memory & remedy faults | |||
| Check the operation of the safety start switches | |||
| Check condition & operation of electrical components |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Tighten wheel hardware to specifications | |||
| Check for loose hardware, linkages; check for leaks | |||
| Tighten loader mounting hardware to specifications | |||
| Clean the cab air springs area | |||
| Check tire pressure | |||
| Lubricate all grease points | 79014728B | 1 | |
| Brake Clean for cleanup | Brake and Parts Cleaner | 890.9107 | 1 |
| Test drive tractor, checking functions & braking systems | |||
| After road test check for leaking oils, fuel or coolant | |||
| Check electro-hydraulic steering | |||
| Check brake control |
| Job | Notes | Part | Quantity |
|---|---|---|---|
| Front wheel rim to dish | |||
| Rear wheel center to hub | |||
| Rear wheel hub tapers to axle (3 step tightening) | |||
| Rear wheel rim to dish | |||
| Front wheels | |||
| Rear wheels | |||
| Wheel Weight, Rear/Tapered Cones – (M16 Bolt) Torque Spec | 195 ft/lbs. with M16 Bolts |
Contact Us Regarding Stock: