Fendt 400 COM1-3 Maintenance Schedules
Go Back to Maintenance Schedules
Engine
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Change engine oil | 15W-40 Engine oil. | 79038710B | 10L |
| Change engine oil filter | 72662762 | 1 | |
| Oil drain plug gasket | 72315100 | 1 | |
| Change fuel filter | 72414768 | 1 | |
| Change fuel pre-filter | As required (72423992). | ||
| Change engine air primary filter | 72415174 | 1 | |
| Change engine air secondary filter | 72415175 | 1 | |
| Check engine coolant level | |||
| Check engine belts | |||
| Change crankcase breather filter | Prior uses 72416501.Effective uses 72426653. | 72416501 | 1 |
| 72426653 | 1 | ||
| Check engine air intake system for leaks | |||
| Clean debris from engine ring fan |
Transmission
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Change transmission oil | 821XL Hyd. / Trany Fluid | 79035451B | 25L |
| Change transmission pressure filter and o-ring | O-Ring is 72313495 | 72659254 | 1 |
| Change transmission suction filter and o-ring | 72313505 | 72317861 | 1 |
| Change the oil in rear axle final drives | Each side gets 7L. 80W90 Gear Oil | 79036959B | 14L |
| Change drain plugs (As Needed) | 72315106 | 1 | |
| Change drain plug gasket in final drives | 72315105 | 4 |
Front Axle & PTO
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Change oil in front PTO | 821XL Hyd./Trany Fluid | 79037113B | 4L |
| Change front axle differential oil | 80W-90 Gear Oil. | 742508 | 2 |
| 79036959B | 7 | ||
| Change oil in front axle hubs | 80W-90 Gear Oil. 1L for each side | 79036959B | 2L |
| Check front axle toe-in | 0 to 1mm (0 to 0.04") | ||
| Grease front axle driveline | |||
| Front axle drain plug gasket | Effective Serial # 411/ 3457 use 72315103 Prior to Serial # 411/ 3456 use O-Rings | 72315103 | 4 |
| 72343390 | 4 | ||
| Check oil level in front PTO | |||
| Check oil level in front differential |
Hydraulics
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Change hydraulic oil | 821XL Hyd./Trany Fluid | 79037113B | 45L |
| Change hydraulic return line filter | Prior 411/ 3327 uses the 250mm filter (72426554).Effective 411/ 3328 uses the 300mm filter (72426561). O-Ring is 72312305 | 72426554 | 1 |
| 72426561 | 1 | ||
| Change hydraulic reservoir breather | 72312079 | 1 | |
| Drain plug gasket | 72313433 | 1 | |
| Check hydraulic oil level |
Cab
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Change fresh air filter | 72478600 | 2 | |
| Change recirculating air filter | Effective 411/ 3273 uses two of 72426606. Prior to 411/ 3272 uses 72478600. | 72426606 | 2 |
| 72478600 | 1 | ||
| Change heater air filter | 72478606 | 1 | |
| Windshield washer reservoir | (JWF) | 15-204 | 1 |
Compressed Air System
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check airline antifreeze level | |||
| Drain Water from Air System |
Electrical System
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Check lighting, signaling, and warnings systems for correct operation | |||
| Check battery acid level | |||
| Read out, record diagnostic memory & remedy faults |
General
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Tighten wheel hardware to specifications | |||
| Check for loose hardware, linkages; check for leaks | |||
| Test drive tractor, checking functions & braking systems | |||
| Check tire pressure | |||
| Lubricate all grease points | |||
| Brake Clean for cleanup | (BC) | 890.9107 | 1 |
Wheel Nut Torque Specifications
Top| Job | Notes | Part | Quantity |
|---|---|---|---|
| Wheel Weight, Rear/Tapered Cones – (M16 Bolt) Torque Spec | 195 ft/lbs. with M16 Bolts |